1 | ###################################################################### |
---|
2 | # |
---|
3 | # TSPSG: TSP Solver and Generator |
---|
4 | # Copyright (C) 2007-2010 Lёppa <contacts[at]oleksii[dot]name> |
---|
5 | # |
---|
6 | # $Id$ |
---|
7 | # $URL$ |
---|
8 | # |
---|
9 | # This file is part of TSPSG. |
---|
10 | # |
---|
11 | ###################################################################### |
---|
12 | |
---|
13 | # Doxyfile 1.6.1 |
---|
14 | |
---|
15 | # This file describes the settings to be used by the documentation system |
---|
16 | # doxygen (www.doxygen.org) for a project |
---|
17 | # |
---|
18 | # All text after a hash (#) is considered a comment and will be ignored |
---|
19 | # The format is: |
---|
20 | # TAG = value [value, ...] |
---|
21 | # For lists items can also be appended using: |
---|
22 | # TAG += value [value, ...] |
---|
23 | # Values that contain spaces should be placed between quotes (" ") |
---|
24 | |
---|
25 | #--------------------------------------------------------------------------- |
---|
26 | # Project related configuration options |
---|
27 | #--------------------------------------------------------------------------- |
---|
28 | |
---|
29 | # This tag specifies the encoding used for all characters in the config file |
---|
30 | # that follow. The default is UTF-8 which is also the encoding used for all |
---|
31 | # text before the first occurrence of this tag. Doxygen uses libiconv (or the |
---|
32 | # iconv built into libc) for the transcoding. See |
---|
33 | # http://www.gnu.org/software/libiconv for the list of possible encodings. |
---|
34 | |
---|
35 | DOXYFILE_ENCODING = UTF-8 |
---|
36 | |
---|
37 | # The PROJECT_NAME tag is a single word (or a sequence of words surrounded |
---|
38 | # by quotes) that should identify the project. |
---|
39 | |
---|
40 | PROJECT_NAME = "TSPSG: TSP Solver and Generator" |
---|
41 | |
---|
42 | # The PROJECT_NUMBER tag can be used to enter a project or revision number. |
---|
43 | # This could be handy for archiving the generated documentation or |
---|
44 | # if some version control system is used. |
---|
45 | |
---|
46 | PROJECT_NUMBER = |
---|
47 | |
---|
48 | # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) |
---|
49 | # base path where the generated documentation will be put. |
---|
50 | # If a relative path is entered, it will be relative to the location |
---|
51 | # where doxygen was started. If left blank the current directory will be used. |
---|
52 | |
---|
53 | OUTPUT_DIRECTORY = docs |
---|
54 | |
---|
55 | # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create |
---|
56 | # 4096 sub-directories (in 2 levels) under the output directory of each output |
---|
57 | # format and will distribute the generated files over these directories. |
---|
58 | # Enabling this option can be useful when feeding doxygen a huge amount of |
---|
59 | # source files, where putting all generated files in the same directory would |
---|
60 | # otherwise cause performance problems for the file system. |
---|
61 | |
---|
62 | CREATE_SUBDIRS = NO |
---|
63 | |
---|
64 | # The OUTPUT_LANGUAGE tag is used to specify the language in which all |
---|
65 | # documentation generated by doxygen is written. Doxygen will use this |
---|
66 | # information to generate all constant output in the proper language. |
---|
67 | # The default language is English, other supported languages are: |
---|
68 | # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, |
---|
69 | # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, |
---|
70 | # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English |
---|
71 | # messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, |
---|
72 | # Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, |
---|
73 | # Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. |
---|
74 | |
---|
75 | OUTPUT_LANGUAGE = English |
---|
76 | |
---|
77 | # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will |
---|
78 | # include brief member descriptions after the members that are listed in |
---|
79 | # the file and class documentation (similar to JavaDoc). |
---|
80 | # Set to NO to disable this. |
---|
81 | |
---|
82 | BRIEF_MEMBER_DESC = YES |
---|
83 | |
---|
84 | # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend |
---|
85 | # the brief description of a member or function before the detailed description. |
---|
86 | # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the |
---|
87 | # brief descriptions will be completely suppressed. |
---|
88 | |
---|
89 | REPEAT_BRIEF = YES |
---|
90 | |
---|
91 | # This tag implements a quasi-intelligent brief description abbreviator |
---|
92 | # that is used to form the text in various listings. Each string |
---|
93 | # in this list, if found as the leading text of the brief description, will be |
---|
94 | # stripped from the text and the result after processing the whole list, is |
---|
95 | # used as the annotated text. Otherwise, the brief description is used as-is. |
---|
96 | # If left blank, the following values are used ("$name" is automatically |
---|
97 | # replaced with the name of the entity): "The $name class" "The $name widget" |
---|
98 | # "The $name file" "is" "provides" "specifies" "contains" |
---|
99 | # "represents" "a" "an" "the" |
---|
100 | |
---|
101 | ABBREVIATE_BRIEF = "The $name class" \ |
---|
102 | "The $name widget" \ |
---|
103 | "The $name file" \ |
---|
104 | is \ |
---|
105 | provides \ |
---|
106 | specifies \ |
---|
107 | contains \ |
---|
108 | represents \ |
---|
109 | a \ |
---|
110 | an \ |
---|
111 | the |
---|
112 | |
---|
113 | # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then |
---|
114 | # Doxygen will generate a detailed section even if there is only a brief |
---|
115 | # description. |
---|
116 | |
---|
117 | ALWAYS_DETAILED_SEC = NO |
---|
118 | |
---|
119 | # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all |
---|
120 | # inherited members of a class in the documentation of that class as if those |
---|
121 | # members were ordinary class members. Constructors, destructors and assignment |
---|
122 | # operators of the base classes will not be shown. |
---|
123 | |
---|
124 | INLINE_INHERITED_MEMB = NO |
---|
125 | |
---|
126 | # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full |
---|
127 | # path before files name in the file list and in the header files. If set |
---|
128 | # to NO the shortest path that makes the file name unique will be used. |
---|
129 | |
---|
130 | FULL_PATH_NAMES = YES |
---|
131 | |
---|
132 | # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag |
---|
133 | # can be used to strip a user-defined part of the path. Stripping is |
---|
134 | # only done if one of the specified strings matches the left-hand part of |
---|
135 | # the path. The tag can be used to show relative paths in the file list. |
---|
136 | # If left blank the directory from which doxygen is run is used as the |
---|
137 | # path to strip. |
---|
138 | |
---|
139 | STRIP_FROM_PATH = |
---|
140 | |
---|
141 | # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of |
---|
142 | # the path mentioned in the documentation of a class, which tells |
---|
143 | # the reader which header file to include in order to use a class. |
---|
144 | # If left blank only the name of the header file containing the class |
---|
145 | # definition is used. Otherwise one should specify the include paths that |
---|
146 | # are normally passed to the compiler using the -I flag. |
---|
147 | |
---|
148 | STRIP_FROM_INC_PATH = |
---|
149 | |
---|
150 | # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter |
---|
151 | # (but less readable) file names. This can be useful is your file systems |
---|
152 | # doesn't support long names like on DOS, Mac, or CD-ROM. |
---|
153 | |
---|
154 | SHORT_NAMES = NO |
---|
155 | |
---|
156 | # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen |
---|
157 | # will interpret the first line (until the first dot) of a JavaDoc-style |
---|
158 | # comment as the brief description. If set to NO, the JavaDoc |
---|
159 | # comments will behave just like regular Qt-style comments |
---|
160 | # (thus requiring an explicit @brief command for a brief description.) |
---|
161 | |
---|
162 | JAVADOC_AUTOBRIEF = NO |
---|
163 | |
---|
164 | # If the QT_AUTOBRIEF tag is set to YES then Doxygen will |
---|
165 | # interpret the first line (until the first dot) of a Qt-style |
---|
166 | # comment as the brief description. If set to NO, the comments |
---|
167 | # will behave just like regular Qt-style comments (thus requiring |
---|
168 | # an explicit \brief command for a brief description.) |
---|
169 | |
---|
170 | QT_AUTOBRIEF = YES |
---|
171 | |
---|
172 | # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen |
---|
173 | # treat a multi-line C++ special comment block (i.e. a block of //! or /// |
---|
174 | # comments) as a brief description. This used to be the default behaviour. |
---|
175 | # The new default is to treat a multi-line C++ comment block as a detailed |
---|
176 | # description. Set this tag to YES if you prefer the old behaviour instead. |
---|
177 | |
---|
178 | MULTILINE_CPP_IS_BRIEF = NO |
---|
179 | |
---|
180 | # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented |
---|
181 | # member inherits the documentation from any documented member that it |
---|
182 | # re-implements. |
---|
183 | |
---|
184 | INHERIT_DOCS = YES |
---|
185 | |
---|
186 | # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce |
---|
187 | # a new page for each member. If set to NO, the documentation of a member will |
---|
188 | # be part of the file/class/namespace that contains it. |
---|
189 | |
---|
190 | SEPARATE_MEMBER_PAGES = NO |
---|
191 | |
---|
192 | # The TAB_SIZE tag can be used to set the number of spaces in a tab. |
---|
193 | # Doxygen uses this value to replace tabs by spaces in code fragments. |
---|
194 | |
---|
195 | TAB_SIZE = 4 |
---|
196 | |
---|
197 | # This tag can be used to specify a number of aliases that acts |
---|
198 | # as commands in the documentation. An alias has the form "name=value". |
---|
199 | # For example adding "sideeffect=\par Side Effects:\n" will allow you to |
---|
200 | # put the command \sideeffect (or @sideeffect) in the documentation, which |
---|
201 | # will result in a user-defined paragraph with heading "Side Effects:". |
---|
202 | # You can put \n's in the value part of an alias to insert newlines. |
---|
203 | |
---|
204 | ALIASES = "hack=\xrefitem hacks \"Hack\" \"Hack List\"" |
---|
205 | |
---|
206 | # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C |
---|
207 | # sources only. Doxygen will then generate output that is more tailored for C. |
---|
208 | # For instance, some of the names that are used will be different. The list |
---|
209 | # of all members will be omitted, etc. |
---|
210 | |
---|
211 | OPTIMIZE_OUTPUT_FOR_C = NO |
---|
212 | |
---|
213 | # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java |
---|
214 | # sources only. Doxygen will then generate output that is more tailored for |
---|
215 | # Java. For instance, namespaces will be presented as packages, qualified |
---|
216 | # scopes will look different, etc. |
---|
217 | |
---|
218 | OPTIMIZE_OUTPUT_JAVA = NO |
---|
219 | |
---|
220 | # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran |
---|
221 | # sources only. Doxygen will then generate output that is more tailored for |
---|
222 | # Fortran. |
---|
223 | |
---|
224 | OPTIMIZE_FOR_FORTRAN = NO |
---|
225 | |
---|
226 | # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL |
---|
227 | # sources. Doxygen will then generate output that is tailored for |
---|
228 | # VHDL. |
---|
229 | |
---|
230 | OPTIMIZE_OUTPUT_VHDL = NO |
---|
231 | |
---|
232 | # Doxygen selects the parser to use depending on the extension of the files it parses. |
---|
233 | # With this tag you can assign which parser to use for a given extension. |
---|
234 | # Doxygen has a built-in mapping, but you can override or extend it using this tag. |
---|
235 | # The format is ext=language, where ext is a file extension, and language is one of |
---|
236 | # the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP, |
---|
237 | # Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat |
---|
238 | # .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran), |
---|
239 | # use: inc=Fortran f=C. Note that for custom extensions you also need to set |
---|
240 | # FILE_PATTERNS otherwise the files are not read by doxygen. |
---|
241 | |
---|
242 | EXTENSION_MAPPING = |
---|
243 | |
---|
244 | # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want |
---|
245 | # to include (a tag file for) the STL sources as input, then you should |
---|
246 | # set this tag to YES in order to let doxygen match functions declarations and |
---|
247 | # definitions whose arguments contain STL classes (e.g. func(std::string); v.s. |
---|
248 | # func(std::string) {}). This also make the inheritance and collaboration |
---|
249 | # diagrams that involve STL classes more complete and accurate. |
---|
250 | |
---|
251 | BUILTIN_STL_SUPPORT = NO |
---|
252 | |
---|
253 | # If you use Microsoft's C++/CLI language, you should set this option to YES to |
---|
254 | # enable parsing support. |
---|
255 | |
---|
256 | CPP_CLI_SUPPORT = NO |
---|
257 | |
---|
258 | # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. |
---|
259 | # Doxygen will parse them like normal C++ but will assume all classes use public |
---|
260 | # instead of private inheritance when no explicit protection keyword is present. |
---|
261 | |
---|
262 | SIP_SUPPORT = NO |
---|
263 | |
---|
264 | # For Microsoft's IDL there are propget and propput attributes to indicate getter |
---|
265 | # and setter methods for a property. Setting this option to YES (the default) |
---|
266 | # will make doxygen to replace the get and set methods by a property in the |
---|
267 | # documentation. This will only work if the methods are indeed getting or |
---|
268 | # setting a simple type. If this is not the case, or you want to show the |
---|
269 | # methods anyway, you should set this option to NO. |
---|
270 | |
---|
271 | IDL_PROPERTY_SUPPORT = YES |
---|
272 | |
---|
273 | # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC |
---|
274 | # tag is set to YES, then doxygen will reuse the documentation of the first |
---|
275 | # member in the group (if any) for the other members of the group. By default |
---|
276 | # all members of a group must be documented explicitly. |
---|
277 | |
---|
278 | DISTRIBUTE_GROUP_DOC = NO |
---|
279 | |
---|
280 | # Set the SUBGROUPING tag to YES (the default) to allow class member groups of |
---|
281 | # the same type (for instance a group of public functions) to be put as a |
---|
282 | # subgroup of that type (e.g. under the Public Functions section). Set it to |
---|
283 | # NO to prevent subgrouping. Alternatively, this can be done per class using |
---|
284 | # the \nosubgrouping command. |
---|
285 | |
---|
286 | SUBGROUPING = YES |
---|
287 | |
---|
288 | # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum |
---|
289 | # is documented as struct, union, or enum with the name of the typedef. So |
---|
290 | # typedef struct TypeS {} TypeT, will appear in the documentation as a struct |
---|
291 | # with name TypeT. When disabled the typedef will appear as a member of a file, |
---|
292 | # namespace, or class. And the struct will be named TypeS. This can typically |
---|
293 | # be useful for C code in case the coding convention dictates that all compound |
---|
294 | # types are typedef'ed and only the typedef is referenced, never the tag name. |
---|
295 | |
---|
296 | TYPEDEF_HIDES_STRUCT = NO |
---|
297 | |
---|
298 | # The SYMBOL_CACHE_SIZE determines the size of the internal cache use to |
---|
299 | # determine which symbols to keep in memory and which to flush to disk. |
---|
300 | # When the cache is full, less often used symbols will be written to disk. |
---|
301 | # For small to medium size projects (<1000 input files) the default value is |
---|
302 | # probably good enough. For larger projects a too small cache size can cause |
---|
303 | # doxygen to be busy swapping symbols to and from disk most of the time |
---|
304 | # causing a significant performance penality. |
---|
305 | # If the system has enough physical memory increasing the cache will improve the |
---|
306 | # performance by keeping more symbols in memory. Note that the value works on |
---|
307 | # a logarithmic scale so increasing the size by one will rougly double the |
---|
308 | # memory usage. The cache size is given by this formula: |
---|
309 | # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, |
---|
310 | # corresponding to a cache size of 2^16 = 65536 symbols |
---|
311 | |
---|
312 | SYMBOL_CACHE_SIZE = 0 |
---|
313 | |
---|
314 | #--------------------------------------------------------------------------- |
---|
315 | # Build related configuration options |
---|
316 | #--------------------------------------------------------------------------- |
---|
317 | |
---|
318 | # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in |
---|
319 | # documentation are documented, even if no documentation was available. |
---|
320 | # Private class members and static file members will be hidden unless |
---|
321 | # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES |
---|
322 | |
---|
323 | EXTRACT_ALL = NO |
---|
324 | |
---|
325 | # If the EXTRACT_PRIVATE tag is set to YES all private members of a class |
---|
326 | # will be included in the documentation. |
---|
327 | |
---|
328 | EXTRACT_PRIVATE = NO |
---|
329 | |
---|
330 | # If the EXTRACT_STATIC tag is set to YES all static members of a file |
---|
331 | # will be included in the documentation. |
---|
332 | |
---|
333 | EXTRACT_STATIC = NO |
---|
334 | |
---|
335 | # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) |
---|
336 | # defined locally in source files will be included in the documentation. |
---|
337 | # If set to NO only classes defined in header files are included. |
---|
338 | |
---|
339 | EXTRACT_LOCAL_CLASSES = YES |
---|
340 | |
---|
341 | # This flag is only useful for Objective-C code. When set to YES local |
---|
342 | # methods, which are defined in the implementation section but not in |
---|
343 | # the interface are included in the documentation. |
---|
344 | # If set to NO (the default) only methods in the interface are included. |
---|
345 | |
---|
346 | EXTRACT_LOCAL_METHODS = NO |
---|
347 | |
---|
348 | # If this flag is set to YES, the members of anonymous namespaces will be |
---|
349 | # extracted and appear in the documentation as a namespace called |
---|
350 | # 'anonymous_namespace{file}', where file will be replaced with the base |
---|
351 | # name of the file that contains the anonymous namespace. By default |
---|
352 | # anonymous namespace are hidden. |
---|
353 | |
---|
354 | EXTRACT_ANON_NSPACES = NO |
---|
355 | |
---|
356 | # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all |
---|
357 | # undocumented members of documented classes, files or namespaces. |
---|
358 | # If set to NO (the default) these members will be included in the |
---|
359 | # various overviews, but no documentation section is generated. |
---|
360 | # This option has no effect if EXTRACT_ALL is enabled. |
---|
361 | |
---|
362 | HIDE_UNDOC_MEMBERS = NO |
---|
363 | |
---|
364 | # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all |
---|
365 | # undocumented classes that are normally visible in the class hierarchy. |
---|
366 | # If set to NO (the default) these classes will be included in the various |
---|
367 | # overviews. This option has no effect if EXTRACT_ALL is enabled. |
---|
368 | |
---|
369 | HIDE_UNDOC_CLASSES = NO |
---|
370 | |
---|
371 | # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all |
---|
372 | # friend (class|struct|union) declarations. |
---|
373 | # If set to NO (the default) these declarations will be included in the |
---|
374 | # documentation. |
---|
375 | |
---|
376 | HIDE_FRIEND_COMPOUNDS = NO |
---|
377 | |
---|
378 | # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any |
---|
379 | # documentation blocks found inside the body of a function. |
---|
380 | # If set to NO (the default) these blocks will be appended to the |
---|
381 | # function's detailed documentation block. |
---|
382 | |
---|
383 | HIDE_IN_BODY_DOCS = NO |
---|
384 | |
---|
385 | # The INTERNAL_DOCS tag determines if documentation |
---|
386 | # that is typed after a \internal command is included. If the tag is set |
---|
387 | # to NO (the default) then the documentation will be excluded. |
---|
388 | # Set it to YES to include the internal documentation. |
---|
389 | |
---|
390 | INTERNAL_DOCS = YES |
---|
391 | |
---|
392 | # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate |
---|
393 | # file names in lower-case letters. If set to YES upper-case letters are also |
---|
394 | # allowed. This is useful if you have classes or files whose names only differ |
---|
395 | # in case and if your file system supports case sensitive file names. Windows |
---|
396 | # and Mac users are advised to set this option to NO. |
---|
397 | |
---|
398 | CASE_SENSE_NAMES = NO |
---|
399 | |
---|
400 | # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen |
---|
401 | # will show members with their full class and namespace scopes in the |
---|
402 | # documentation. If set to YES the scope will be hidden. |
---|
403 | |
---|
404 | HIDE_SCOPE_NAMES = NO |
---|
405 | |
---|
406 | # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen |
---|
407 | # will put a list of the files that are included by a file in the documentation |
---|
408 | # of that file. |
---|
409 | |
---|
410 | SHOW_INCLUDE_FILES = YES |
---|
411 | |
---|
412 | # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] |
---|
413 | # is inserted in the documentation for inline members. |
---|
414 | |
---|
415 | INLINE_INFO = YES |
---|
416 | |
---|
417 | # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen |
---|
418 | # will sort the (detailed) documentation of file and class members |
---|
419 | # alphabetically by member name. If set to NO the members will appear in |
---|
420 | # declaration order. |
---|
421 | |
---|
422 | SORT_MEMBER_DOCS = YES |
---|
423 | |
---|
424 | # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the |
---|
425 | # brief documentation of file, namespace and class members alphabetically |
---|
426 | # by member name. If set to NO (the default) the members will appear in |
---|
427 | # declaration order. |
---|
428 | |
---|
429 | SORT_BRIEF_DOCS = NO |
---|
430 | |
---|
431 | # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen |
---|
432 | # will sort the (brief and detailed) documentation of class members so that |
---|
433 | # constructors and destructors are listed first. If set to NO (the default) |
---|
434 | # the constructors will appear in the respective orders defined by |
---|
435 | # SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. |
---|
436 | # This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO |
---|
437 | # and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. |
---|
438 | |
---|
439 | SORT_MEMBERS_CTORS_1ST = NO |
---|
440 | |
---|
441 | # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the |
---|
442 | # hierarchy of group names into alphabetical order. If set to NO (the default) |
---|
443 | # the group names will appear in their defined order. |
---|
444 | |
---|
445 | SORT_GROUP_NAMES = NO |
---|
446 | |
---|
447 | # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be |
---|
448 | # sorted by fully-qualified names, including namespaces. If set to |
---|
449 | # NO (the default), the class list will be sorted only by class name, |
---|
450 | # not including the namespace part. |
---|
451 | # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. |
---|
452 | # Note: This option applies only to the class list, not to the |
---|
453 | # alphabetical list. |
---|
454 | |
---|
455 | SORT_BY_SCOPE_NAME = NO |
---|
456 | |
---|
457 | # The GENERATE_TODOLIST tag can be used to enable (YES) or |
---|
458 | # disable (NO) the todo list. This list is created by putting \todo |
---|
459 | # commands in the documentation. |
---|
460 | |
---|
461 | GENERATE_TODOLIST = YES |
---|
462 | |
---|
463 | # The GENERATE_TESTLIST tag can be used to enable (YES) or |
---|
464 | # disable (NO) the test list. This list is created by putting \test |
---|
465 | # commands in the documentation. |
---|
466 | |
---|
467 | GENERATE_TESTLIST = YES |
---|
468 | |
---|
469 | # The GENERATE_BUGLIST tag can be used to enable (YES) or |
---|
470 | # disable (NO) the bug list. This list is created by putting \bug |
---|
471 | # commands in the documentation. |
---|
472 | |
---|
473 | GENERATE_BUGLIST = YES |
---|
474 | |
---|
475 | # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or |
---|
476 | # disable (NO) the deprecated list. This list is created by putting |
---|
477 | # \deprecated commands in the documentation. |
---|
478 | |
---|
479 | GENERATE_DEPRECATEDLIST= YES |
---|
480 | |
---|
481 | # The ENABLED_SECTIONS tag can be used to enable conditional |
---|
482 | # documentation sections, marked by \if sectionname ... \endif. |
---|
483 | |
---|
484 | ENABLED_SECTIONS = |
---|
485 | |
---|
486 | # The MAX_INITIALIZER_LINES tag determines the maximum number of lines |
---|
487 | # the initial value of a variable or define consists of for it to appear in |
---|
488 | # the documentation. If the initializer consists of more lines than specified |
---|
489 | # here it will be hidden. Use a value of 0 to hide initializers completely. |
---|
490 | # The appearance of the initializer of individual variables and defines in the |
---|
491 | # documentation can be controlled using \showinitializer or \hideinitializer |
---|
492 | # command in the documentation regardless of this setting. |
---|
493 | |
---|
494 | MAX_INITIALIZER_LINES = 30 |
---|
495 | |
---|
496 | # Set the SHOW_USED_FILES tag to NO to disable the list of files generated |
---|
497 | # at the bottom of the documentation of classes and structs. If set to YES the |
---|
498 | # list will mention the files that were used to generate the documentation. |
---|
499 | |
---|
500 | SHOW_USED_FILES = YES |
---|
501 | |
---|
502 | # If the sources in your project are distributed over multiple directories |
---|
503 | # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy |
---|
504 | # in the documentation. The default is NO. |
---|
505 | |
---|
506 | SHOW_DIRECTORIES = NO |
---|
507 | |
---|
508 | # Set the SHOW_FILES tag to NO to disable the generation of the Files page. |
---|
509 | # This will remove the Files entry from the Quick Index and from the |
---|
510 | # Folder Tree View (if specified). The default is YES. |
---|
511 | |
---|
512 | SHOW_FILES = YES |
---|
513 | |
---|
514 | # Set the SHOW_NAMESPACES tag to NO to disable the generation of the |
---|
515 | # Namespaces page. This will remove the Namespaces entry from the Quick Index |
---|
516 | # and from the Folder Tree View (if specified). The default is YES. |
---|
517 | |
---|
518 | SHOW_NAMESPACES = YES |
---|
519 | |
---|
520 | # The FILE_VERSION_FILTER tag can be used to specify a program or script that |
---|
521 | # doxygen should invoke to get the current version for each file (typically from |
---|
522 | # the version control system). Doxygen will invoke the program by executing (via |
---|
523 | # popen()) the command <command> <input-file>, where <command> is the value of |
---|
524 | # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file |
---|
525 | # provided by doxygen. Whatever the program writes to standard output |
---|
526 | # is used as the file version. See the manual for examples. |
---|
527 | |
---|
528 | FILE_VERSION_FILTER = |
---|
529 | |
---|
530 | # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by |
---|
531 | # doxygen. The layout file controls the global structure of the generated output files |
---|
532 | # in an output format independent way. The create the layout file that represents |
---|
533 | # doxygen's defaults, run doxygen with the -l option. You can optionally specify a |
---|
534 | # file name after the option, if omitted DoxygenLayout.xml will be used as the name |
---|
535 | # of the layout file. |
---|
536 | |
---|
537 | LAYOUT_FILE = |
---|
538 | |
---|
539 | #--------------------------------------------------------------------------- |
---|
540 | # configuration options related to warning and progress messages |
---|
541 | #--------------------------------------------------------------------------- |
---|
542 | |
---|
543 | # The QUIET tag can be used to turn on/off the messages that are generated |
---|
544 | # by doxygen. Possible values are YES and NO. If left blank NO is used. |
---|
545 | |
---|
546 | QUIET = NO |
---|
547 | |
---|
548 | # The WARNINGS tag can be used to turn on/off the warning messages that are |
---|
549 | # generated by doxygen. Possible values are YES and NO. If left blank |
---|
550 | # NO is used. |
---|
551 | |
---|
552 | WARNINGS = YES |
---|
553 | |
---|
554 | # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings |
---|
555 | # for undocumented members. If EXTRACT_ALL is set to YES then this flag will |
---|
556 | # automatically be disabled. |
---|
557 | |
---|
558 | WARN_IF_UNDOCUMENTED = YES |
---|
559 | |
---|
560 | # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for |
---|
561 | # potential errors in the documentation, such as not documenting some |
---|
562 | # parameters in a documented function, or documenting parameters that |
---|
563 | # don't exist or using markup commands wrongly. |
---|
564 | |
---|
565 | WARN_IF_DOC_ERROR = YES |
---|
566 | |
---|
567 | # This WARN_NO_PARAMDOC option can be abled to get warnings for |
---|
568 | # functions that are documented, but have no documentation for their parameters |
---|
569 | # or return value. If set to NO (the default) doxygen will only warn about |
---|
570 | # wrong or incomplete parameter documentation, but not about the absence of |
---|
571 | # documentation. |
---|
572 | |
---|
573 | WARN_NO_PARAMDOC = NO |
---|
574 | |
---|
575 | # The WARN_FORMAT tag determines the format of the warning messages that |
---|
576 | # doxygen can produce. The string should contain the $file, $line, and $text |
---|
577 | # tags, which will be replaced by the file and line number from which the |
---|
578 | # warning originated and the warning text. Optionally the format may contain |
---|
579 | # $version, which will be replaced by the version of the file (if it could |
---|
580 | # be obtained via FILE_VERSION_FILTER) |
---|
581 | |
---|
582 | WARN_FORMAT = "$file:$line: $text" |
---|
583 | |
---|
584 | # The WARN_LOGFILE tag can be used to specify a file to which warning |
---|
585 | # and error messages should be written. If left blank the output is written |
---|
586 | # to stderr. |
---|
587 | |
---|
588 | WARN_LOGFILE = |
---|
589 | |
---|
590 | #--------------------------------------------------------------------------- |
---|
591 | # configuration options related to the input files |
---|
592 | #--------------------------------------------------------------------------- |
---|
593 | |
---|
594 | # The INPUT tag can be used to specify the files and/or directories that contain |
---|
595 | # documented source files. You may enter file names like "myfile.cpp" or |
---|
596 | # directories like "/usr/src/myproject". Separate the files or directories |
---|
597 | # with spaces. |
---|
598 | |
---|
599 | INPUT = src docs/dox |
---|
600 | |
---|
601 | # This tag can be used to specify the character encoding of the source files |
---|
602 | # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is |
---|
603 | # also the default input encoding. Doxygen uses libiconv (or the iconv built |
---|
604 | # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for |
---|
605 | # the list of possible encodings. |
---|
606 | |
---|
607 | INPUT_ENCODING = UTF-8 |
---|
608 | |
---|
609 | # If the value of the INPUT tag contains directories, you can use the |
---|
610 | # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp |
---|
611 | # and *.h) to filter out the source-files in the directories. If left |
---|
612 | # blank the following patterns are tested: |
---|
613 | # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx |
---|
614 | # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 |
---|
615 | |
---|
616 | FILE_PATTERNS = *.c \ |
---|
617 | *.cc \ |
---|
618 | *.cxx \ |
---|
619 | *.cpp \ |
---|
620 | *.c++ \ |
---|
621 | *.d \ |
---|
622 | *.java \ |
---|
623 | *.ii \ |
---|
624 | *.ixx \ |
---|
625 | *.ipp \ |
---|
626 | *.i++ \ |
---|
627 | *.inl \ |
---|
628 | *.h \ |
---|
629 | *.hh \ |
---|
630 | *.hxx \ |
---|
631 | *.hpp \ |
---|
632 | *.h++ \ |
---|
633 | *.idl \ |
---|
634 | *.odl \ |
---|
635 | *.cs \ |
---|
636 | *.php \ |
---|
637 | *.php3 \ |
---|
638 | *.inc \ |
---|
639 | *.m \ |
---|
640 | *.mm \ |
---|
641 | *.dox \ |
---|
642 | *.py \ |
---|
643 | *.f90 \ |
---|
644 | *.f \ |
---|
645 | *.vhd \ |
---|
646 | *.vhdl |
---|
647 | |
---|
648 | # The RECURSIVE tag can be used to turn specify whether or not subdirectories |
---|
649 | # should be searched for input files as well. Possible values are YES and NO. |
---|
650 | # If left blank NO is used. |
---|
651 | |
---|
652 | RECURSIVE = NO |
---|
653 | |
---|
654 | # The EXCLUDE tag can be used to specify files and/or directories that should |
---|
655 | # excluded from the INPUT source files. This way you can easily exclude a |
---|
656 | # subdirectory from a directory tree whose root is specified with the INPUT tag. |
---|
657 | |
---|
658 | EXCLUDE = |
---|
659 | |
---|
660 | # The EXCLUDE_SYMLINKS tag can be used select whether or not files or |
---|
661 | # directories that are symbolic links (a Unix filesystem feature) are excluded |
---|
662 | # from the input. |
---|
663 | |
---|
664 | EXCLUDE_SYMLINKS = NO |
---|
665 | |
---|
666 | # If the value of the INPUT tag contains directories, you can use the |
---|
667 | # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude |
---|
668 | # certain files from those directories. Note that the wildcards are matched |
---|
669 | # against the file with absolute path, so to exclude all test directories |
---|
670 | # for example use the pattern */test/* |
---|
671 | |
---|
672 | EXCLUDE_PATTERNS = |
---|
673 | |
---|
674 | # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names |
---|
675 | # (namespaces, classes, functions, etc.) that should be excluded from the |
---|
676 | # output. The symbol name can be a fully qualified name, a word, or if the |
---|
677 | # wildcard * is used, a substring. Examples: ANamespace, AClass, |
---|
678 | # AClass::ANamespace, ANamespace::*Test |
---|
679 | |
---|
680 | EXCLUDE_SYMBOLS = |
---|
681 | |
---|
682 | # The EXAMPLE_PATH tag can be used to specify one or more files or |
---|
683 | # directories that contain example code fragments that are included (see |
---|
684 | # the \include command). |
---|
685 | |
---|
686 | EXAMPLE_PATH = . |
---|
687 | |
---|
688 | # If the value of the EXAMPLE_PATH tag contains directories, you can use the |
---|
689 | # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp |
---|
690 | # and *.h) to filter out the source-files in the directories. If left |
---|
691 | # blank all files are included. |
---|
692 | |
---|
693 | EXAMPLE_PATTERNS = * |
---|
694 | |
---|
695 | # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be |
---|
696 | # searched for input files to be used with the \include or \dontinclude |
---|
697 | # commands irrespective of the value of the RECURSIVE tag. |
---|
698 | # Possible values are YES and NO. If left blank NO is used. |
---|
699 | |
---|
700 | EXAMPLE_RECURSIVE = NO |
---|
701 | |
---|
702 | # The IMAGE_PATH tag can be used to specify one or more files or |
---|
703 | # directories that contain image that are included in the documentation (see |
---|
704 | # the \image command). |
---|
705 | |
---|
706 | IMAGE_PATH = resources |
---|
707 | |
---|
708 | # The INPUT_FILTER tag can be used to specify a program that doxygen should |
---|
709 | # invoke to filter for each input file. Doxygen will invoke the filter program |
---|
710 | # by executing (via popen()) the command <filter> <input-file>, where <filter> |
---|
711 | # is the value of the INPUT_FILTER tag, and <input-file> is the name of an |
---|
712 | # input file. Doxygen will then use the output that the filter program writes |
---|
713 | # to standard output. If FILTER_PATTERNS is specified, this tag will be |
---|
714 | # ignored. |
---|
715 | |
---|
716 | INPUT_FILTER = |
---|
717 | |
---|
718 | # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern |
---|
719 | # basis. Doxygen will compare the file name with each pattern and apply the |
---|
720 | # filter if there is a match. The filters are a list of the form: |
---|
721 | # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further |
---|
722 | # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER |
---|
723 | # is applied to all files. |
---|
724 | |
---|
725 | FILTER_PATTERNS = |
---|
726 | |
---|
727 | # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using |
---|
728 | # INPUT_FILTER) will be used to filter the input files when producing source |
---|
729 | # files to browse (i.e. when SOURCE_BROWSER is set to YES). |
---|
730 | |
---|
731 | FILTER_SOURCE_FILES = NO |
---|
732 | |
---|
733 | #--------------------------------------------------------------------------- |
---|
734 | # configuration options related to source browsing |
---|
735 | #--------------------------------------------------------------------------- |
---|
736 | |
---|
737 | # If the SOURCE_BROWSER tag is set to YES then a list of source files will |
---|
738 | # be generated. Documented entities will be cross-referenced with these sources. |
---|
739 | # Note: To get rid of all source code in the generated output, make sure also |
---|
740 | # VERBATIM_HEADERS is set to NO. |
---|
741 | |
---|
742 | SOURCE_BROWSER = NO |
---|
743 | |
---|
744 | # Setting the INLINE_SOURCES tag to YES will include the body |
---|
745 | # of functions and classes directly in the documentation. |
---|
746 | |
---|
747 | INLINE_SOURCES = NO |
---|
748 | |
---|
749 | # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct |
---|
750 | # doxygen to hide any special comment blocks from generated source code |
---|
751 | # fragments. Normal C and C++ comments will always remain visible. |
---|
752 | |
---|
753 | STRIP_CODE_COMMENTS = YES |
---|
754 | |
---|
755 | # If the REFERENCED_BY_RELATION tag is set to YES |
---|
756 | # then for each documented function all documented |
---|
757 | # functions referencing it will be listed. |
---|
758 | |
---|
759 | REFERENCED_BY_RELATION = NO |
---|
760 | |
---|
761 | # If the REFERENCES_RELATION tag is set to YES |
---|
762 | # then for each documented function all documented entities |
---|
763 | # called/used by that function will be listed. |
---|
764 | |
---|
765 | REFERENCES_RELATION = NO |
---|
766 | |
---|
767 | # If the REFERENCES_LINK_SOURCE tag is set to YES (the default) |
---|
768 | # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from |
---|
769 | # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will |
---|
770 | # link to the source code. Otherwise they will link to the documentation. |
---|
771 | |
---|
772 | REFERENCES_LINK_SOURCE = YES |
---|
773 | |
---|
774 | # If the USE_HTAGS tag is set to YES then the references to source code |
---|
775 | # will point to the HTML generated by the htags(1) tool instead of doxygen |
---|
776 | # built-in source browser. The htags tool is part of GNU's global source |
---|
777 | # tagging system (see http://www.gnu.org/software/global/global.html). You |
---|
778 | # will need version 4.8.6 or higher. |
---|
779 | |
---|
780 | USE_HTAGS = NO |
---|
781 | |
---|
782 | # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen |
---|
783 | # will generate a verbatim copy of the header file for each class for |
---|
784 | # which an include is specified. Set to NO to disable this. |
---|
785 | |
---|
786 | VERBATIM_HEADERS = YES |
---|
787 | |
---|
788 | #--------------------------------------------------------------------------- |
---|
789 | # configuration options related to the alphabetical class index |
---|
790 | #--------------------------------------------------------------------------- |
---|
791 | |
---|
792 | # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index |
---|
793 | # of all compounds will be generated. Enable this if the project |
---|
794 | # contains a lot of classes, structs, unions or interfaces. |
---|
795 | |
---|
796 | ALPHABETICAL_INDEX = NO |
---|
797 | |
---|
798 | # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then |
---|
799 | # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns |
---|
800 | # in which this list will be split (can be a number in the range [1..20]) |
---|
801 | |
---|
802 | COLS_IN_ALPHA_INDEX = 5 |
---|
803 | |
---|
804 | # In case all classes in a project start with a common prefix, all |
---|
805 | # classes will be put under the same header in the alphabetical index. |
---|
806 | # The IGNORE_PREFIX tag can be used to specify one or more prefixes that |
---|
807 | # should be ignored while generating the index headers. |
---|
808 | |
---|
809 | IGNORE_PREFIX = |
---|
810 | |
---|
811 | #--------------------------------------------------------------------------- |
---|
812 | # configuration options related to the HTML output |
---|
813 | #--------------------------------------------------------------------------- |
---|
814 | |
---|
815 | # If the GENERATE_HTML tag is set to YES (the default) Doxygen will |
---|
816 | # generate HTML output. |
---|
817 | |
---|
818 | GENERATE_HTML = YES |
---|
819 | |
---|
820 | # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. |
---|
821 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be |
---|
822 | # put in front of it. If left blank `html' will be used as the default path. |
---|
823 | |
---|
824 | HTML_OUTPUT = html |
---|
825 | |
---|
826 | # The HTML_FILE_EXTENSION tag can be used to specify the file extension for |
---|
827 | # each generated HTML page (for example: .htm,.php,.asp). If it is left blank |
---|
828 | # doxygen will generate files with .html extension. |
---|
829 | |
---|
830 | HTML_FILE_EXTENSION = .html |
---|
831 | |
---|
832 | # The HTML_HEADER tag can be used to specify a personal HTML header for |
---|
833 | # each generated HTML page. If it is left blank doxygen will generate a |
---|
834 | # standard header. |
---|
835 | |
---|
836 | HTML_HEADER = |
---|
837 | |
---|
838 | # The HTML_FOOTER tag can be used to specify a personal HTML footer for |
---|
839 | # each generated HTML page. If it is left blank doxygen will generate a |
---|
840 | # standard footer. |
---|
841 | |
---|
842 | HTML_FOOTER = |
---|
843 | |
---|
844 | # The HTML_STYLESHEET tag can be used to specify a user-defined cascading |
---|
845 | # style sheet that is used by each HTML page. It can be used to |
---|
846 | # fine-tune the look of the HTML output. If the tag is left blank doxygen |
---|
847 | # will generate a default style sheet. Note that doxygen will try to copy |
---|
848 | # the style sheet file to the HTML output directory, so don't put your own |
---|
849 | # stylesheet in the HTML output directory as well, or it will be erased! |
---|
850 | |
---|
851 | HTML_STYLESHEET = |
---|
852 | |
---|
853 | # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, |
---|
854 | # files or namespaces will be aligned in HTML using tables. If set to |
---|
855 | # NO a bullet list will be used. |
---|
856 | |
---|
857 | HTML_ALIGN_MEMBERS = YES |
---|
858 | |
---|
859 | # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML |
---|
860 | # documentation will contain sections that can be hidden and shown after the |
---|
861 | # page has loaded. For this to work a browser that supports |
---|
862 | # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox |
---|
863 | # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). |
---|
864 | |
---|
865 | HTML_DYNAMIC_SECTIONS = YES |
---|
866 | |
---|
867 | # If the GENERATE_DOCSET tag is set to YES, additional index files |
---|
868 | # will be generated that can be used as input for Apple's Xcode 3 |
---|
869 | # integrated development environment, introduced with OSX 10.5 (Leopard). |
---|
870 | # To create a documentation set, doxygen will generate a Makefile in the |
---|
871 | # HTML output directory. Running make will produce the docset in that |
---|
872 | # directory and running "make install" will install the docset in |
---|
873 | # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find |
---|
874 | # it at startup. |
---|
875 | # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information. |
---|
876 | |
---|
877 | GENERATE_DOCSET = NO |
---|
878 | |
---|
879 | # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the |
---|
880 | # feed. A documentation feed provides an umbrella under which multiple |
---|
881 | # documentation sets from a single provider (such as a company or product suite) |
---|
882 | # can be grouped. |
---|
883 | |
---|
884 | DOCSET_FEEDNAME = "Doxygen generated docs" |
---|
885 | |
---|
886 | # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that |
---|
887 | # should uniquely identify the documentation set bundle. This should be a |
---|
888 | # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen |
---|
889 | # will append .docset to the name. |
---|
890 | |
---|
891 | DOCSET_BUNDLE_ID = org.doxygen.Project |
---|
892 | |
---|
893 | # If the GENERATE_HTMLHELP tag is set to YES, additional index files |
---|
894 | # will be generated that can be used as input for tools like the |
---|
895 | # Microsoft HTML help workshop to generate a compiled HTML help file (.chm) |
---|
896 | # of the generated HTML documentation. |
---|
897 | |
---|
898 | GENERATE_HTMLHELP = NO |
---|
899 | |
---|
900 | # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can |
---|
901 | # be used to specify the file name of the resulting .chm file. You |
---|
902 | # can add a path in front of the file if the result should not be |
---|
903 | # written to the html output directory. |
---|
904 | |
---|
905 | CHM_FILE = |
---|
906 | |
---|
907 | # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can |
---|
908 | # be used to specify the location (absolute path including file name) of |
---|
909 | # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run |
---|
910 | # the HTML help compiler on the generated index.hhp. |
---|
911 | |
---|
912 | HHC_LOCATION = |
---|
913 | |
---|
914 | # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag |
---|
915 | # controls if a separate .chi index file is generated (YES) or that |
---|
916 | # it should be included in the master .chm file (NO). |
---|
917 | |
---|
918 | GENERATE_CHI = NO |
---|
919 | |
---|
920 | # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING |
---|
921 | # is used to encode HtmlHelp index (hhk), content (hhc) and project file |
---|
922 | # content. |
---|
923 | |
---|
924 | CHM_INDEX_ENCODING = |
---|
925 | |
---|
926 | # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag |
---|
927 | # controls whether a binary table of contents is generated (YES) or a |
---|
928 | # normal table of contents (NO) in the .chm file. |
---|
929 | |
---|
930 | BINARY_TOC = NO |
---|
931 | |
---|
932 | # The TOC_EXPAND flag can be set to YES to add extra items for group members |
---|
933 | # to the contents of the HTML help documentation and to the tree view. |
---|
934 | |
---|
935 | TOC_EXPAND = NO |
---|
936 | |
---|
937 | # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER |
---|
938 | # are set, an additional index file will be generated that can be used as input for |
---|
939 | # Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated |
---|
940 | # HTML documentation. |
---|
941 | |
---|
942 | GENERATE_QHP = NO |
---|
943 | |
---|
944 | # If the QHG_LOCATION tag is specified, the QCH_FILE tag can |
---|
945 | # be used to specify the file name of the resulting .qch file. |
---|
946 | # The path specified is relative to the HTML output folder. |
---|
947 | |
---|
948 | QCH_FILE = |
---|
949 | |
---|
950 | # The QHP_NAMESPACE tag specifies the namespace to use when generating |
---|
951 | # Qt Help Project output. For more information please see |
---|
952 | # http://doc.trolltech.com/qthelpproject.html#namespace |
---|
953 | |
---|
954 | QHP_NAMESPACE = |
---|
955 | |
---|
956 | # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating |
---|
957 | # Qt Help Project output. For more information please see |
---|
958 | # http://doc.trolltech.com/qthelpproject.html#virtual-folders |
---|
959 | |
---|
960 | QHP_VIRTUAL_FOLDER = doc |
---|
961 | |
---|
962 | # If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add. |
---|
963 | # For more information please see |
---|
964 | # http://doc.trolltech.com/qthelpproject.html#custom-filters |
---|
965 | |
---|
966 | QHP_CUST_FILTER_NAME = |
---|
967 | |
---|
968 | # The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see |
---|
969 | # <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>. |
---|
970 | |
---|
971 | QHP_CUST_FILTER_ATTRS = |
---|
972 | |
---|
973 | # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's |
---|
974 | # filter section matches. |
---|
975 | # <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>. |
---|
976 | |
---|
977 | QHP_SECT_FILTER_ATTRS = |
---|
978 | |
---|
979 | # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can |
---|
980 | # be used to specify the location of Qt's qhelpgenerator. |
---|
981 | # If non-empty doxygen will try to run qhelpgenerator on the generated |
---|
982 | # .qhp file. |
---|
983 | |
---|
984 | QHG_LOCATION = |
---|
985 | |
---|
986 | # The DISABLE_INDEX tag can be used to turn on/off the condensed index at |
---|
987 | # top of each HTML page. The value NO (the default) enables the index and |
---|
988 | # the value YES disables it. |
---|
989 | |
---|
990 | DISABLE_INDEX = NO |
---|
991 | |
---|
992 | # This tag can be used to set the number of enum values (range [1..20]) |
---|
993 | # that doxygen will group on one line in the generated HTML documentation. |
---|
994 | |
---|
995 | ENUM_VALUES_PER_LINE = 4 |
---|
996 | |
---|
997 | # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index |
---|
998 | # structure should be generated to display hierarchical information. |
---|
999 | # If the tag value is set to YES, a side panel will be generated |
---|
1000 | # containing a tree-like index structure (just like the one that |
---|
1001 | # is generated for HTML Help). For this to work a browser that supports |
---|
1002 | # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). |
---|
1003 | # Windows users are probably better off using the HTML help feature. |
---|
1004 | |
---|
1005 | GENERATE_TREEVIEW = NO |
---|
1006 | |
---|
1007 | # By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, |
---|
1008 | # and Class Hierarchy pages using a tree view instead of an ordered list. |
---|
1009 | |
---|
1010 | USE_INLINE_TREES = NO |
---|
1011 | |
---|
1012 | # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be |
---|
1013 | # used to set the initial width (in pixels) of the frame in which the tree |
---|
1014 | # is shown. |
---|
1015 | |
---|
1016 | TREEVIEW_WIDTH = 250 |
---|
1017 | |
---|
1018 | # Use this tag to change the font size of Latex formulas included |
---|
1019 | # as images in the HTML documentation. The default is 10. Note that |
---|
1020 | # when you change the font size after a successful doxygen run you need |
---|
1021 | # to manually remove any form_*.png images from the HTML output directory |
---|
1022 | # to force them to be regenerated. |
---|
1023 | |
---|
1024 | FORMULA_FONTSIZE = 10 |
---|
1025 | |
---|
1026 | # When the SEARCHENGINE tag is enable doxygen will generate a search box |
---|
1027 | # for the HTML output. The underlying search engine uses javascript |
---|
1028 | # and DHTML and should work on any modern browser. Note that when using |
---|
1029 | # HTML help (GENERATE_HTMLHELP) or Qt help (GENERATE_QHP) |
---|
1030 | # there is already a search function so this one should typically |
---|
1031 | # be disabled. |
---|
1032 | |
---|
1033 | SEARCHENGINE = YES |
---|
1034 | |
---|
1035 | #--------------------------------------------------------------------------- |
---|
1036 | # configuration options related to the LaTeX output |
---|
1037 | #--------------------------------------------------------------------------- |
---|
1038 | |
---|
1039 | # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will |
---|
1040 | # generate Latex output. |
---|
1041 | |
---|
1042 | GENERATE_LATEX = NO |
---|
1043 | |
---|
1044 | # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. |
---|
1045 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be |
---|
1046 | # put in front of it. If left blank `latex' will be used as the default path. |
---|
1047 | |
---|
1048 | LATEX_OUTPUT = latex |
---|
1049 | |
---|
1050 | # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be |
---|
1051 | # invoked. If left blank `latex' will be used as the default command name. |
---|
1052 | |
---|
1053 | LATEX_CMD_NAME = latex |
---|
1054 | |
---|
1055 | # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to |
---|
1056 | # generate index for LaTeX. If left blank `makeindex' will be used as the |
---|
1057 | # default command name. |
---|
1058 | |
---|
1059 | MAKEINDEX_CMD_NAME = makeindex |
---|
1060 | |
---|
1061 | # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact |
---|
1062 | # LaTeX documents. This may be useful for small projects and may help to |
---|
1063 | # save some trees in general. |
---|
1064 | |
---|
1065 | COMPACT_LATEX = NO |
---|
1066 | |
---|
1067 | # The PAPER_TYPE tag can be used to set the paper type that is used |
---|
1068 | # by the printer. Possible values are: a4, a4wide, letter, legal and |
---|
1069 | # executive. If left blank a4wide will be used. |
---|
1070 | |
---|
1071 | PAPER_TYPE = a4wide |
---|
1072 | |
---|
1073 | # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX |
---|
1074 | # packages that should be included in the LaTeX output. |
---|
1075 | |
---|
1076 | EXTRA_PACKAGES = |
---|
1077 | |
---|
1078 | # The LATEX_HEADER tag can be used to specify a personal LaTeX header for |
---|
1079 | # the generated latex document. The header should contain everything until |
---|
1080 | # the first chapter. If it is left blank doxygen will generate a |
---|
1081 | # standard header. Notice: only use this tag if you know what you are doing! |
---|
1082 | |
---|
1083 | LATEX_HEADER = |
---|
1084 | |
---|
1085 | # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated |
---|
1086 | # is prepared for conversion to pdf (using ps2pdf). The pdf file will |
---|
1087 | # contain links (just like the HTML output) instead of page references |
---|
1088 | # This makes the output suitable for online browsing using a pdf viewer. |
---|
1089 | |
---|
1090 | PDF_HYPERLINKS = YES |
---|
1091 | |
---|
1092 | # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of |
---|
1093 | # plain latex in the generated Makefile. Set this option to YES to get a |
---|
1094 | # higher quality PDF documentation. |
---|
1095 | |
---|
1096 | USE_PDFLATEX = YES |
---|
1097 | |
---|
1098 | # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. |
---|
1099 | # command to the generated LaTeX files. This will instruct LaTeX to keep |
---|
1100 | # running if errors occur, instead of asking the user for help. |
---|
1101 | # This option is also used when generating formulas in HTML. |
---|
1102 | |
---|
1103 | LATEX_BATCHMODE = NO |
---|
1104 | |
---|
1105 | # If LATEX_HIDE_INDICES is set to YES then doxygen will not |
---|
1106 | # include the index chapters (such as File Index, Compound Index, etc.) |
---|
1107 | # in the output. |
---|
1108 | |
---|
1109 | LATEX_HIDE_INDICES = NO |
---|
1110 | |
---|
1111 | # If LATEX_SOURCE_CODE is set to YES then doxygen will include |
---|
1112 | # source code with syntax highlighting in the LaTeX output. |
---|
1113 | # Note that which sources are shown also depends on other settings |
---|
1114 | # such as SOURCE_BROWSER. |
---|
1115 | |
---|
1116 | LATEX_SOURCE_CODE = NO |
---|
1117 | |
---|
1118 | #--------------------------------------------------------------------------- |
---|
1119 | # configuration options related to the RTF output |
---|
1120 | #--------------------------------------------------------------------------- |
---|
1121 | |
---|
1122 | # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output |
---|
1123 | # The RTF output is optimized for Word 97 and may not look very pretty with |
---|
1124 | # other RTF readers or editors. |
---|
1125 | |
---|
1126 | GENERATE_RTF = NO |
---|
1127 | |
---|
1128 | # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. |
---|
1129 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be |
---|
1130 | # put in front of it. If left blank `rtf' will be used as the default path. |
---|
1131 | |
---|
1132 | RTF_OUTPUT = rtf |
---|
1133 | |
---|
1134 | # If the COMPACT_RTF tag is set to YES Doxygen generates more compact |
---|
1135 | # RTF documents. This may be useful for small projects and may help to |
---|
1136 | # save some trees in general. |
---|
1137 | |
---|
1138 | COMPACT_RTF = NO |
---|
1139 | |
---|
1140 | # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated |
---|
1141 | # will contain hyperlink fields. The RTF file will |
---|
1142 | # contain links (just like the HTML output) instead of page references. |
---|
1143 | # This makes the output suitable for online browsing using WORD or other |
---|
1144 | # programs which support those fields. |
---|
1145 | # Note: wordpad (write) and others do not support links. |
---|
1146 | |
---|
1147 | RTF_HYPERLINKS = NO |
---|
1148 | |
---|
1149 | # Load stylesheet definitions from file. Syntax is similar to doxygen's |
---|
1150 | # config file, i.e. a series of assignments. You only have to provide |
---|
1151 | # replacements, missing definitions are set to their default value. |
---|
1152 | |
---|
1153 | RTF_STYLESHEET_FILE = |
---|
1154 | |
---|
1155 | # Set optional variables used in the generation of an rtf document. |
---|
1156 | # Syntax is similar to doxygen's config file. |
---|
1157 | |
---|
1158 | RTF_EXTENSIONS_FILE = |
---|
1159 | |
---|
1160 | #--------------------------------------------------------------------------- |
---|
1161 | # configuration options related to the man page output |
---|
1162 | #--------------------------------------------------------------------------- |
---|
1163 | |
---|
1164 | # If the GENERATE_MAN tag is set to YES (the default) Doxygen will |
---|
1165 | # generate man pages |
---|
1166 | |
---|
1167 | GENERATE_MAN = NO |
---|
1168 | |
---|
1169 | # The MAN_OUTPUT tag is used to specify where the man pages will be put. |
---|
1170 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be |
---|
1171 | # put in front of it. If left blank `man' will be used as the default path. |
---|
1172 | |
---|
1173 | MAN_OUTPUT = man |
---|
1174 | |
---|
1175 | # The MAN_EXTENSION tag determines the extension that is added to |
---|
1176 | # the generated man pages (default is the subroutine's section .3) |
---|
1177 | |
---|
1178 | MAN_EXTENSION = .3 |
---|
1179 | |
---|
1180 | # If the MAN_LINKS tag is set to YES and Doxygen generates man output, |
---|
1181 | # then it will generate one additional man file for each entity |
---|
1182 | # documented in the real man page(s). These additional files |
---|
1183 | # only source the real man page, but without them the man command |
---|
1184 | # would be unable to find the correct page. The default is NO. |
---|
1185 | |
---|
1186 | MAN_LINKS = NO |
---|
1187 | |
---|
1188 | #--------------------------------------------------------------------------- |
---|
1189 | # configuration options related to the XML output |
---|
1190 | #--------------------------------------------------------------------------- |
---|
1191 | |
---|
1192 | # If the GENERATE_XML tag is set to YES Doxygen will |
---|
1193 | # generate an XML file that captures the structure of |
---|
1194 | # the code including all documentation. |
---|
1195 | |
---|
1196 | GENERATE_XML = NO |
---|
1197 | |
---|
1198 | # The XML_OUTPUT tag is used to specify where the XML pages will be put. |
---|
1199 | # If a relative path is entered the value of OUTPUT_DIRECTORY will be |
---|
1200 | # put in front of it. If left blank `xml' will be used as the default path. |
---|
1201 | |
---|
1202 | XML_OUTPUT = xml |
---|
1203 | |
---|
1204 | # The XML_SCHEMA tag can be used to specify an XML schema, |
---|
1205 | # which can be used by a validating XML parser to check the |
---|
1206 | # syntax of the XML files. |
---|
1207 | |
---|
1208 | XML_SCHEMA = |
---|
1209 | |
---|
1210 | # The XML_DTD tag can be used to specify an XML DTD, |
---|
1211 | # which can be used by a validating XML parser to check the |
---|
1212 | # syntax of the XML files. |
---|
1213 | |
---|
1214 | XML_DTD = |
---|
1215 | |
---|
1216 | # If the XML_PROGRAMLISTING tag is set to YES Doxygen will |
---|
1217 | # dump the program listings (including syntax highlighting |
---|
1218 | # and cross-referencing information) to the XML output. Note that |
---|
1219 | # enabling this will significantly increase the size of the XML output. |
---|
1220 | |
---|
1221 | XML_PROGRAMLISTING = YES |
---|
1222 | |
---|
1223 | #--------------------------------------------------------------------------- |
---|
1224 | # configuration options for the AutoGen Definitions output |
---|
1225 | #--------------------------------------------------------------------------- |
---|
1226 | |
---|
1227 | # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will |
---|
1228 | # generate an AutoGen Definitions (see autogen.sf.net) file |
---|
1229 | # that captures the structure of the code including all |
---|
1230 | # documentation. Note that this feature is still experimental |
---|
1231 | # and incomplete at the moment. |
---|
1232 | |
---|
1233 | GENERATE_AUTOGEN_DEF = NO |
---|
1234 | |
---|
1235 | #--------------------------------------------------------------------------- |
---|
1236 | # configuration options related to the Perl module output |
---|
1237 | #--------------------------------------------------------------------------- |
---|
1238 | |
---|
1239 | # If the GENERATE_PERLMOD tag is set to YES Doxygen will |
---|
1240 | # generate a Perl module file that captures the structure of |
---|
1241 | # the code including all documentation. Note that this |
---|
1242 | # feature is still experimental and incomplete at the |
---|
1243 | # moment. |
---|
1244 | |
---|
1245 | GENERATE_PERLMOD = NO |
---|
1246 | |
---|
1247 | # If the PERLMOD_LATEX tag is set to YES Doxygen will generate |
---|
1248 | # the necessary Makefile rules, Perl scripts and LaTeX code to be able |
---|
1249 | # to generate PDF and DVI output from the Perl module output. |
---|
1250 | |
---|
1251 | PERLMOD_LATEX = NO |
---|
1252 | |
---|
1253 | # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be |
---|
1254 | # nicely formatted so it can be parsed by a human reader. This is useful |
---|
1255 | # if you want to understand what is going on. On the other hand, if this |
---|
1256 | # tag is set to NO the size of the Perl module output will be much smaller |
---|
1257 | # and Perl will parse it just the same. |
---|
1258 | |
---|
1259 | PERLMOD_PRETTY = YES |
---|
1260 | |
---|
1261 | # The names of the make variables in the generated doxyrules.make file |
---|
1262 | # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. |
---|
1263 | # This is useful so different doxyrules.make files included by the same |
---|
1264 | # Makefile don't overwrite each other's variables. |
---|
1265 | |
---|
1266 | PERLMOD_MAKEVAR_PREFIX = |
---|
1267 | |
---|
1268 | #--------------------------------------------------------------------------- |
---|
1269 | # Configuration options related to the preprocessor |
---|
1270 | #--------------------------------------------------------------------------- |
---|
1271 | |
---|
1272 | # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will |
---|
1273 | # evaluate all C-preprocessor directives found in the sources and include |
---|
1274 | # files. |
---|
1275 | |
---|
1276 | ENABLE_PREPROCESSING = YES |
---|
1277 | |
---|
1278 | # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro |
---|
1279 | # names in the source code. If set to NO (the default) only conditional |
---|
1280 | # compilation will be performed. Macro expansion can be done in a controlled |
---|
1281 | # way by setting EXPAND_ONLY_PREDEF to YES. |
---|
1282 | |
---|
1283 | MACRO_EXPANSION = NO |
---|
1284 | |
---|
1285 | # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES |
---|
1286 | # then the macro expansion is limited to the macros specified with the |
---|
1287 | # PREDEFINED and EXPAND_AS_DEFINED tags. |
---|
1288 | |
---|
1289 | EXPAND_ONLY_PREDEF = NO |
---|
1290 | |
---|
1291 | # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files |
---|
1292 | # in the INCLUDE_PATH (see below) will be search if a #include is found. |
---|
1293 | |
---|
1294 | SEARCH_INCLUDES = YES |
---|
1295 | |
---|
1296 | # The INCLUDE_PATH tag can be used to specify one or more directories that |
---|
1297 | # contain include files that are not input files but should be processed by |
---|
1298 | # the preprocessor. |
---|
1299 | |
---|
1300 | INCLUDE_PATH = |
---|
1301 | |
---|
1302 | # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard |
---|
1303 | # patterns (like *.h and *.hpp) to filter out the header-files in the |
---|
1304 | # directories. If left blank, the patterns specified with FILE_PATTERNS will |
---|
1305 | # be used. |
---|
1306 | |
---|
1307 | INCLUDE_FILE_PATTERNS = |
---|
1308 | |
---|
1309 | # The PREDEFINED tag can be used to specify one or more macro names that |
---|
1310 | # are defined before the preprocessor is started (similar to the -D option of |
---|
1311 | # gcc). The argument of the tag is a list of macros of the form: name |
---|
1312 | # or name=definition (no spaces). If the definition and the = are |
---|
1313 | # omitted =1 is assumed. To prevent a macro definition from being |
---|
1314 | # undefined via #undef or recursively expanded use the := operator |
---|
1315 | # instead of the = operator. |
---|
1316 | |
---|
1317 | PREDEFINED = __i386__ Q_OS_WIN32 |
---|
1318 | |
---|
1319 | # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then |
---|
1320 | # this tag can be used to specify a list of macro names that should be expanded. |
---|
1321 | # The macro definition that is found in the sources will be used. |
---|
1322 | # Use the PREDEFINED tag if you want to use a different macro definition. |
---|
1323 | |
---|
1324 | EXPAND_AS_DEFINED = |
---|
1325 | |
---|
1326 | # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then |
---|
1327 | # doxygen's preprocessor will remove all function-like macros that are alone |
---|
1328 | # on a line, have an all uppercase name, and do not end with a semicolon. Such |
---|
1329 | # function macros are typically used for boiler-plate code, and will confuse |
---|
1330 | # the parser if not removed. |
---|
1331 | |
---|
1332 | SKIP_FUNCTION_MACROS = YES |
---|
1333 | |
---|
1334 | #--------------------------------------------------------------------------- |
---|
1335 | # Configuration::additions related to external references |
---|
1336 | #--------------------------------------------------------------------------- |
---|
1337 | |
---|
1338 | # The TAGFILES option can be used to specify one or more tagfiles. |
---|
1339 | # Optionally an initial location of the external documentation |
---|
1340 | # can be added for each tagfile. The format of a tag file without |
---|
1341 | # this location is as follows: |
---|
1342 | # TAGFILES = file1 file2 ... |
---|
1343 | # Adding location for the tag files is done as follows: |
---|
1344 | # TAGFILES = file1=loc1 "file2 = loc2" ... |
---|
1345 | # where "loc1" and "loc2" can be relative or absolute paths or |
---|
1346 | # URLs. If a location is present for each tag, the installdox tool |
---|
1347 | # does not have to be run to correct the links. |
---|
1348 | # Note that each tag file must have a unique name |
---|
1349 | # (where the name does NOT include the path) |
---|
1350 | # If a tag file is not located in the directory in which doxygen |
---|
1351 | # is run, you must also specify the path to the tagfile here. |
---|
1352 | |
---|
1353 | TAGFILES = docs/qt-4.6.tag=http://doc.trolltech.com/4.6 |
---|
1354 | |
---|
1355 | # When a file name is specified after GENERATE_TAGFILE, doxygen will create |
---|
1356 | # a tag file that is based on the input files it reads. |
---|
1357 | |
---|
1358 | GENERATE_TAGFILE = docs/tspsg.tag |
---|
1359 | |
---|
1360 | # If the ALLEXTERNALS tag is set to YES all external classes will be listed |
---|
1361 | # in the class index. If set to NO only the inherited external classes |
---|
1362 | # will be listed. |
---|
1363 | |
---|
1364 | ALLEXTERNALS = NO |
---|
1365 | |
---|
1366 | # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed |
---|
1367 | # in the modules index. If set to NO, only the current project's groups will |
---|
1368 | # be listed. |
---|
1369 | |
---|
1370 | EXTERNAL_GROUPS = YES |
---|
1371 | |
---|
1372 | # The PERL_PATH should be the absolute path and name of the perl script |
---|
1373 | # interpreter (i.e. the result of `which perl'). |
---|
1374 | |
---|
1375 | PERL_PATH = /usr/bin/perl |
---|
1376 | |
---|
1377 | #--------------------------------------------------------------------------- |
---|
1378 | # Configuration options related to the dot tool |
---|
1379 | #--------------------------------------------------------------------------- |
---|
1380 | |
---|
1381 | # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will |
---|
1382 | # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base |
---|
1383 | # or super classes. Setting the tag to NO turns the diagrams off. Note that |
---|
1384 | # this option is superseded by the HAVE_DOT option below. This is only a |
---|
1385 | # fallback. It is recommended to install and use dot, since it yields more |
---|
1386 | # powerful graphs. |
---|
1387 | |
---|
1388 | CLASS_DIAGRAMS = YES |
---|
1389 | |
---|
1390 | # You can define message sequence charts within doxygen comments using the \msc |
---|
1391 | # command. Doxygen will then run the mscgen tool (see |
---|
1392 | # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the |
---|
1393 | # documentation. The MSCGEN_PATH tag allows you to specify the directory where |
---|
1394 | # the mscgen tool resides. If left empty the tool is assumed to be found in the |
---|
1395 | # default search path. |
---|
1396 | |
---|
1397 | MSCGEN_PATH = |
---|
1398 | |
---|
1399 | # If set to YES, the inheritance and collaboration graphs will hide |
---|
1400 | # inheritance and usage relations if the target is undocumented |
---|
1401 | # or is not a class. |
---|
1402 | |
---|
1403 | HIDE_UNDOC_RELATIONS = YES |
---|
1404 | |
---|
1405 | # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is |
---|
1406 | # available from the path. This tool is part of Graphviz, a graph visualization |
---|
1407 | # toolkit from AT&T and Lucent Bell Labs. The other options in this section |
---|
1408 | # have no effect if this option is set to NO (the default) |
---|
1409 | |
---|
1410 | HAVE_DOT = YES |
---|
1411 | |
---|
1412 | # By default doxygen will write a font called FreeSans.ttf to the output |
---|
1413 | # directory and reference it in all dot files that doxygen generates. This |
---|
1414 | # font does not include all possible unicode characters however, so when you need |
---|
1415 | # these (or just want a differently looking font) you can specify the font name |
---|
1416 | # using DOT_FONTNAME. You need need to make sure dot is able to find the font, |
---|
1417 | # which can be done by putting it in a standard location or by setting the |
---|
1418 | # DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory |
---|
1419 | # containing the font. |
---|
1420 | |
---|
1421 | DOT_FONTNAME = FreeSans |
---|
1422 | |
---|
1423 | # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. |
---|
1424 | # The default size is 10pt. |
---|
1425 | |
---|
1426 | DOT_FONTSIZE = 10 |
---|
1427 | |
---|
1428 | # By default doxygen will tell dot to use the output directory to look for the |
---|
1429 | # FreeSans.ttf font (which doxygen will put there itself). If you specify a |
---|
1430 | # different font using DOT_FONTNAME you can set the path where dot |
---|
1431 | # can find it using this tag. |
---|
1432 | |
---|
1433 | DOT_FONTPATH = |
---|
1434 | |
---|
1435 | # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen |
---|
1436 | # will generate a graph for each documented class showing the direct and |
---|
1437 | # indirect inheritance relations. Setting this tag to YES will force the |
---|
1438 | # the CLASS_DIAGRAMS tag to NO. |
---|
1439 | |
---|
1440 | CLASS_GRAPH = YES |
---|
1441 | |
---|
1442 | # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen |
---|
1443 | # will generate a graph for each documented class showing the direct and |
---|
1444 | # indirect implementation dependencies (inheritance, containment, and |
---|
1445 | # class references variables) of the class with other documented classes. |
---|
1446 | |
---|
1447 | COLLABORATION_GRAPH = YES |
---|
1448 | |
---|
1449 | # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen |
---|
1450 | # will generate a graph for groups, showing the direct groups dependencies |
---|
1451 | |
---|
1452 | GROUP_GRAPHS = YES |
---|
1453 | |
---|
1454 | # If the UML_LOOK tag is set to YES doxygen will generate inheritance and |
---|
1455 | # collaboration diagrams in a style similar to the OMG's Unified Modeling |
---|
1456 | # Language. |
---|
1457 | |
---|
1458 | UML_LOOK = NO |
---|
1459 | |
---|
1460 | # If set to YES, the inheritance and collaboration graphs will show the |
---|
1461 | # relations between templates and their instances. |
---|
1462 | |
---|
1463 | TEMPLATE_RELATIONS = NO |
---|
1464 | |
---|
1465 | # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT |
---|
1466 | # tags are set to YES then doxygen will generate a graph for each documented |
---|
1467 | # file showing the direct and indirect include dependencies of the file with |
---|
1468 | # other documented files. |
---|
1469 | |
---|
1470 | INCLUDE_GRAPH = YES |
---|
1471 | |
---|
1472 | # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and |
---|
1473 | # HAVE_DOT tags are set to YES then doxygen will generate a graph for each |
---|
1474 | # documented header file showing the documented files that directly or |
---|
1475 | # indirectly include this file. |
---|
1476 | |
---|
1477 | INCLUDED_BY_GRAPH = YES |
---|
1478 | |
---|
1479 | # If the CALL_GRAPH and HAVE_DOT options are set to YES then |
---|
1480 | # doxygen will generate a call dependency graph for every global function |
---|
1481 | # or class method. Note that enabling this option will significantly increase |
---|
1482 | # the time of a run. So in most cases it will be better to enable call graphs |
---|
1483 | # for selected functions only using the \callgraph command. |
---|
1484 | |
---|
1485 | CALL_GRAPH = YES |
---|
1486 | |
---|
1487 | # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then |
---|
1488 | # doxygen will generate a caller dependency graph for every global function |
---|
1489 | # or class method. Note that enabling this option will significantly increase |
---|
1490 | # the time of a run. So in most cases it will be better to enable caller |
---|
1491 | # graphs for selected functions only using the \callergraph command. |
---|
1492 | |
---|
1493 | CALLER_GRAPH = YES |
---|
1494 | |
---|
1495 | # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen |
---|
1496 | # will graphical hierarchy of all classes instead of a textual one. |
---|
1497 | |
---|
1498 | GRAPHICAL_HIERARCHY = YES |
---|
1499 | |
---|
1500 | # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES |
---|
1501 | # then doxygen will show the dependencies a directory has on other directories |
---|
1502 | # in a graphical way. The dependency relations are determined by the #include |
---|
1503 | # relations between the files in the directories. |
---|
1504 | |
---|
1505 | DIRECTORY_GRAPH = YES |
---|
1506 | |
---|
1507 | # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images |
---|
1508 | # generated by dot. Possible values are png, jpg, or gif |
---|
1509 | # If left blank png will be used. |
---|
1510 | |
---|
1511 | DOT_IMAGE_FORMAT = png |
---|
1512 | |
---|
1513 | # The tag DOT_PATH can be used to specify the path where the dot tool can be |
---|
1514 | # found. If left blank, it is assumed the dot tool can be found in the path. |
---|
1515 | |
---|
1516 | DOT_PATH = |
---|
1517 | |
---|
1518 | # The DOTFILE_DIRS tag can be used to specify one or more directories that |
---|
1519 | # contain dot files that are included in the documentation (see the |
---|
1520 | # \dotfile command). |
---|
1521 | |
---|
1522 | DOTFILE_DIRS = |
---|
1523 | |
---|
1524 | # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of |
---|
1525 | # nodes that will be shown in the graph. If the number of nodes in a graph |
---|
1526 | # becomes larger than this value, doxygen will truncate the graph, which is |
---|
1527 | # visualized by representing a node as a red box. Note that doxygen if the |
---|
1528 | # number of direct children of the root node in a graph is already larger than |
---|
1529 | # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note |
---|
1530 | # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. |
---|
1531 | |
---|
1532 | DOT_GRAPH_MAX_NODES = 50 |
---|
1533 | |
---|
1534 | # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the |
---|
1535 | # graphs generated by dot. A depth value of 3 means that only nodes reachable |
---|
1536 | # from the root by following a path via at most 3 edges will be shown. Nodes |
---|
1537 | # that lay further from the root node will be omitted. Note that setting this |
---|
1538 | # option to 1 or 2 may greatly reduce the computation time needed for large |
---|
1539 | # code bases. Also note that the size of a graph can be further restricted by |
---|
1540 | # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. |
---|
1541 | |
---|
1542 | MAX_DOT_GRAPH_DEPTH = 0 |
---|
1543 | |
---|
1544 | # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent |
---|
1545 | # background. This is disabled by default, because dot on Windows does not |
---|
1546 | # seem to support this out of the box. Warning: Depending on the platform used, |
---|
1547 | # enabling this option may lead to badly anti-aliased labels on the edges of |
---|
1548 | # a graph (i.e. they become hard to read). |
---|
1549 | |
---|
1550 | DOT_TRANSPARENT = YES |
---|
1551 | |
---|
1552 | # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output |
---|
1553 | # files in one run (i.e. multiple -o and -T options on the command line). This |
---|
1554 | # makes dot run faster, but since only newer versions of dot (>1.8.10) |
---|
1555 | # support this, this feature is disabled by default. |
---|
1556 | |
---|
1557 | DOT_MULTI_TARGETS = NO |
---|
1558 | |
---|
1559 | # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will |
---|
1560 | # generate a legend page explaining the meaning of the various boxes and |
---|
1561 | # arrows in the dot generated graphs. |
---|
1562 | |
---|
1563 | GENERATE_LEGEND = YES |
---|
1564 | |
---|
1565 | # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will |
---|
1566 | # remove the intermediate dot files that are used to generate |
---|
1567 | # the various graphs. |
---|
1568 | |
---|
1569 | DOT_CLEANUP = YES |
---|